The SB.1 Parking Barrier with integral lock and two keys is the most effective parking barrier. It is light to operate, very robust, has a handle for clean operation, extra padlock facility – this gives the unique advantage of reverting to a padlock in the event of vandalism plus double security in high risk areas. Will operate in all weather conditions. Bolts directly to surface. Working parts in stainless steel. Tough coated finish in either black, white or yellow. The UNIQUE GATE-TYPE DESIGN DETERS PARKING BETWEEN BARRIERS on empty car parks.

Measurements:
Overall height, upright position, 650mm. Overall width 600mm. Height in collapsed position only 90mm.

The SB.11W is a similar design to the SB.1 Parking Barrier. Should the requirements be for several posts plus parking barriers, this would be the ideal product to mix and match. Available in tough white, yellow or galvanised finish.

Measurements:
Overall height, upright position, 610mm. Overall width 600mm. Height in collapsed position only 85mm.

The SB.2 Parking Barrier offers savings where UNIT cost is all important; it has a padlock facility only and is slightly heavier to operate. Locks in the up and down positions. Pinion in stainless steel. Complete with four bolts. Tough coated finish.

Measurements:
Overall height, upright position, 700mm. Overall width 670mm. Height in collapsed position only 60mm.

Available in two types, either as removable or fixed. The base is secured to the ground with four anchor bolts. The removable post is secured to the base with a stainless steel pin which contains a padlock facility – eyelets are provided for chain attachments to both types. Suitable for cordoning off large areas with random access through the removable type. Finished in tough white coating.

Measurements:
Overall height 740mm.
Overall width 80mm.
Overall height of base when removed 60mm.